您好!欢迎光临山东超光耀金属材料有限公司,我们竭诚为您服务!
定制咨询热线130-2059-8630
您的位置:首页 > 行业新闻

行业新闻

联系我们

山东超光耀金属材料有限公司

联系人:孙经理

手机:130-2059-8630(微信同号)

手机:186-6356-3990

邮箱:1358951588@qq.com

网址:http://www.sdcgy.com

地址:山东省聊城市高新区许营镇店子朱营村942号

如何使用好的彩钢夹芯板呢?

作者:山东超光耀金属材料有限公司 来源:http://www.sdcgy.com 日期:2022/3/25 18:04:11

  现在市场上彩钢夹芯板厂家众多,参差不齐。很多人在购买彩钢夹芯板时,并不知道真正好的彩钢夹芯板和劣质的主要区别。因为外观上都差不多,暂时不用也看不出区别。那么,如何使用好的彩钢夹芯板呢?彩钢夹芯板由基材和涂层组成。

  Color steel sandwich plate manufacturers are numerous on the market now, uneven. Many people in the purchase of color steel sandwich plate, do not know the main difference between really good color steel sandwich plate and inferior. Because the appearance is similar, temporarily do not also see the difference. So, how to use a good color steel sandwich plate? Color steel sandwich plate is composed of substrate and coating.

  如果是镀锌板,尽量用锌层高,大钢厂,质量安全的厚钢板,室内60-80克,室外120克。有些工厂会以次充好,虚报锌层克重,我们可以拿到成品锌层认证。

  If it is galvanized sheet, try to use zinc layer, large steel mills, quality and safety of thick steel plate, indoor 60-80 grams, outdoor 120 grams. Some factories will falsely report the weight of zinc layer, and we can get the certification of finished zinc layer.

  如果是太阳能电池,也需要选择大企业的产品。一些北方铝厂将使用再生铝。虽然价格划算,但太阳能电池上的残留物很多,中后期甚至可能出现铝腐蚀。

  If it is solar cells, you need to choose products from large companies. Some northern smelters will use recycled aluminum. Although the price is good, there are many residues on the solar cells, and in the middle and later stages, there may even be aluminum corrosion.

  涂层一般喷涂聚酯和氟碳漆。聚酯纤维在房间里很常见。它不应该被风触碰,也不能轻易暴露在阳光下。价格低廉,是常用的油漆,腐蚀和保色在户外高要求的工程项目中很常见。

  The coating is generally sprayed with polyester and fluorocarbon paint. Polyester fibers are common in rooms. It should not be touched by the wind or easily exposed to the sun. Inexpensive, commonly used paint, corrosion and color preservation are common in outdoor demanding engineering projects.

7.30 (3).jpg

  优质氟碳喷漆含氟量不低于70%。还需要注意油漆的厚度。一般氟碳喷漆的漆面不能小于18u。否则,一般没有保修期。

  High quality fluorocarbon spray paint fluoride content is not less than 70%. Also pay attention to the thickness of the paint. General fluorocarbon spray paint paint can not be less than 18U. Otherwise, there is generally no warranty period.

  选购时如何看彩钢夹芯板的质量,主要可以从以下几点进行选择:

  可以先观察彩钢夹芯板的外露钢材,比如断面是否有细晶、灰色、深色、并且有杂质。如果切面是细晶型的质量上乘;我们也可以听声音。您可以用手指或硬物轻敲彩钢板,如果彩钢夹芯板的材质不好,声音就会沉闷而有金属感。不是很明显,材质较好的彩钢夹芯板的金属声音比较响亮清脆。

  How to look at the quality of color steel sandwich plate when choosing, mainly from the following points to choose:

  You can first observe the exposed steel of the color steel sandwich plate, such as whether the section has fine grain, gray, dark color, and impurities. If the section is fine grain type, the quality is good; We can also listen

  to sounds. You can tap the color steel plate with your fingers or hard objects. If the material of the color steel sandwich plate is not good, the sound will be dull and metallic. Not very obvious, the metal sound of better color steel sandwich board is louder and clearer.

  看价格,彩钢夹芯板的质量就是一分钱一分货。我们在比较彩钢夹芯板质量的时候,价格是一方面,但不要太在意价格。其他的要低得多,所以我们必须注意。另外,如果您还有问题要了解的话,欢迎点击http://www.sdcgy.com这个网址咨询吧!

  Look at the price, the quality of color steel sandwich plate is a penny. When we compare the quality of color steel sandwich plate, the price is on the one hand, but do not care too much about the price. Others are much lower, so we have to be careful. In addition, if you still have questions to understand, please click on the website http://www.sdcgy.com to consult!


130-2059-8630