您好!欢迎光临山东超光耀金属材料有限公司,我们竭诚为您服务!
定制咨询热线130-2059-8630
您的位置:首页 > 行业新闻

行业新闻

联系我们

山东超光耀金属材料有限公司

联系人:孙经理

手机:130-2059-8630(微信同号)

手机:186-6356-3990

邮箱:1358951588@qq.com

网址:http://www.sdcgy.com

地址:山东省聊城市高新区许营镇店子朱营村942号

仿古金属瓦的质量好坏靠什么辨别?

作者:山东超光耀金属材料有限公司 来源:http://www.sdcgy.com 日期:2022/3/30 11:28:33

  仿古金属瓦在很多领域中都有所应用,不过常见的还是建筑行业,尤其是建筑屋面装饰方面,如果想后面取得好效果,那么仿古金属瓦的质量就要有保障。那么仿古金属瓦的质量好坏靠什么辨别呢?

  Antique metal tile has been used in many fields, but it is common in the construction industry, especially in the building roof decoration, if you want to achieve good results behind, then the quality of antique metal tile must be guaranteed. So what does the quality of antique metal tile depend on to distinguish?

  看仿古金属瓦的底漆如何。底漆的作用是保护铝瓦不受厨房或浴室日常生活中扣板与铝瓦底部连接处产生的水汽影响,使吊顶扣板底面长时间与水和空气接触。它开始生锈和发霉,直到它变得无用。集成吊顶的优质铝瓦底漆要均匀喷涂在板底,如何均匀,这样用眼睛仔细观察板底时,不会发现任何银灰色斑点占优势。

  Look at the primer on the antique metal shingles. The role of primer is to protect the aluminum tile from the kitchen or bathroom daily life of gusset and aluminum tile bottom joint of the water vapor impact, so that the bottom surface of the ceiling gusset for a long time with water and air contact. It starts to rust and mold until it becomes useless. The quality aluminum tile primer for the integrated ceiling should be evenly applied to the bottom of the board, how evenly so that when carefully observed with the eye, no silver-gray spots will be found dominant.

  看仿古金属瓦表面的的吸水率。吸水率是底部,有助于改善其他更多的产品的性能,如强度和密度会随着吸水率低,有不同程度的增加,吸水率低,会随着气候的变化热胀冷缩而产生龟裂或剥落,所以在选购前,要先多了解一下它的吸水率。

  Look at the water absorption rate of archaize metal tile surface. Water absorption is the bottom, help to improve the performance of other more products, such as strength and density will be low with water absorption, there are different degrees of increase, water absorption is low, with the change of climate, thermal expansion and contraction and produce cracking or peeling, so before the purchase, to know more about its water absorption.

8.3 (2).jpg

  看仿古金属瓦的柔韧度和强度。取一个铝扣板并用手弯曲。坏的铝瓦很容易弯曲,不会恢复到原来的形状。弯曲后会有一定的回弹作用,这就是铝材韧性和强度的差异。好的铝瓦安装后不会在中间弯曲或掉落,而且很稳固。

  Look at the flexibility and strength of antique metal tiles. Take an aluminum gusset and bend it by hand. Broken aluminum shingles bend easily and do not return to their original shape. After bending, there will be a certain rebound effect, which is the difference between the toughness and strength of aluminum. Good aluminum shingles don't bend or fall off in the middle when installed, and are firm.

  看仿古金属瓦正面覆盖的膜的好坏。看铝扣板靠边缘的地方能不能把覆膜揭起来。合格铝扣板覆膜是在高温下复合上去的,揭不下来,能揭下来的是胶粘的,不能购买。

  Look at the quality of the film covering the front of the archaize metal tile. See aluminum gusset plate on the edge of the place can be covered film lift. Qualified aluminum gusset plate laminating is compound under high temperature, uncover not come down, can uncover come down is gummy, cannot buy.

  看仿古金属瓦表面的污垢。如果仿古金属瓦上的污垢容易清洁,则证明仿古金属瓦的防污性能良好。防污性能测试可产生微量粉尘。很好的清洁,证明了仿古金属瓦的质量保证。

  Look at the dirt on the antique metal tile. If the dirt on the antique metal tile is easy to clean, it proves that the antifouling performance of the antique metal tile is good. Antifouling performance test can produce trace dust. Very good cleaning, proof of antique metal tile quality assurance.

  我们在选购仿古金属瓦厂家的时候,可以用以上的方法来判断它的质量。如果您还有其他关于该产品的问题的话,欢迎您点击http://www.sdcgy.com网址来咨询我们的客服人员,为您进行详细的解答。

  When we choose and buy antique metal tile manufacturers, we can use the above method to judge its quality. If you have any other questions about this product, please click http://www.sdcgy.com to consult our customer service staff for detailed answers.


130-2059-8630