不锈钢花纹板是通过机械设备在不锈钢板上进行压纹加工，使板面出现凹凸图纹。在六十年代初由欧洲的大型轧钢厂开始小批量生产，随后由于不锈钢花纹板很好的耐腐蚀性和防滑性得到了众多行业的采用从而开始普及。早期的不锈钢花纹板的花纹样式为横竖条纹交错式，国内山西太钢和上海宝钢集团都在生产，在随后的20-30年中研究人员经过不断的实验和改进把拥有更好的防滑性的花纹设计出来也大规模的生产推广和应用了。近几年不锈钢花纹板的用途也在不断的创新、突破、改变，适用的行业和产品型号也在不断的增加，产品更新换代的速度也更加的频繁。
The stainless steel checkered plate is embossed on the stainless steel plate by mechanical equipment, so that the concave convex pattern appears on the plate surface. In the early 1960s, large-scale rolling mills in Europe started small batch production, and then stainless steel checkered plates became popular because of their good corrosion resistance and skid resistance. The pattern pattern pattern of the early stainless steel pattern plate was crisscross of horizontal and vertical stripes. Both Shanxi Taiyuan Iron and Steel Co., Ltd. and Shanghai Baosteel Group were producing it in China. In the following 20-30 years, researchers designed patterns with better skid resistance through continuous experiments and improvements, and also promoted and applied them in large-scale production. In recent years, the use of stainless steel checkered plates has been constantly innovating, breaking through and changing, the applicable industries and product models are also increasing, and the speed of product upgrading is also more frequent.
生产工艺流程
Production process flow
不锈钢花纹板分两大类：
Stainless steel checkered plates fall into two categories:
一类是钢厂在生产不锈钢时通过轧机轧制而成的，这类产品主要厚度在3-6mm左右，是热轧后退火酸洗装状态，其工艺过程如下：
The first type is rolled by the steel mill during the production of stainless steel. The main thickness of this type of product is about 3-6mm. It is in the hot rolling backward hot pickling state. The process is as follows:
不锈钢坯→热连轧机轧制黑卷→热退火和酸洗线→平整机、拉矫机、抛光线→横切线→热轧不锈钢花纹板
Stainless steel billet → hot continuous rolling mill rolling black coil → hot annealing and pickling line → temper mill, tension leveler, polishing line → transverse tangent → hot rolled stainless steel checkered plate
这类花纹板一面是平的，另一面是花纹。此类花纹板较常用于化工、铁路车辆、平台等要求强度的场合。此类产品以进口为主，一般来自于日本和比利时，国内太钢和宝钢生产的属于这一类型。
This kind of pattern board is flat on one side and pattern on the other. This kind of checkered plate is often used in chemical industry, railway vehicles, platforms and other occasions requiring strength. Such products are mainly imported from Japan and Belgium, and those produced by domestic TISCO and Baosteel belong to this type.
二类是市场上的加工企业，购买钢厂的热轧或冷轧不锈钢 板，通过机械冲压而成的花纹板，这类产品一面凹一面凸，常用于一般民用装饰的场合。此类产品冷轧较多，市场上的2B/BA冷轧不锈钢花纹板大部分是此类型。
The second category is the processing enterprises in the market, which purchase the hot-rolled or cold-rolled stainless steel plates from steel plants and the patterned plates formed by mechanical stamping. These products are concave on one side and convex on the other, and are commonly used in general civil decoration occasions. There are many cold-rolled products of this kind. Most of 2b/ba cold-rolled stainless steel checkered plates on the market are of this type.
本文的精彩内容由不锈钢花纹板提供知识提供，本网站还有很多的精彩内容，更多的内容您可以点击进入http://www.sdcgy.com我们有专门的客服为您解答问题
The wonderful content of this article is provided by stainless steel checkered plate. There are many wonderful content on this website. You can click to enter more content http://www.sdcgy.com We have special customer service to answer your questions
